Latest Auto Industrial News

Workshop equipment sale

29th Apr 2019 in

Equipment consists of head-reconditioning machinery. To be sold as a 'lot' and will not  be sold as individual pieces of equipment. Many pieces only 1.5yrs old with all equipment meticulously maintained and in excellent condition. Call 0488 911 200 for info...

Workshop equipment sale (continued)

29th Apr 2019 in

Equipment consists of head-reconditioning machinery. To be sold as a 'lot' and will not  be sold as individual pieces of equipment. All equipment meticulously maintained and in excellent condition. Call 0488 911 200 for information [caption id="attachmen...

Micrometers / measuring equipment: clearance

Micrometers / measuring equipment: clearance

16th Jan 2019 in

code: MMES150. Measuring, Micrometer external, set of 6, 0-150mm (0.01mm) including all calibration rods (5x). Wooden box damaged underside. $120.00+GST code: MMI12. Measuring, Micometer Internal (Inside) 1-2 " Measuremax (23-1485) Black plastic case, i...

Rotary Parts Washer – 1220HD

Rotary Parts Washer – 1220HD

20th Nov 2018 in

Model1220HD These gear-driven units have  a 50% increase in wash weight capacity over standard, water driven models.   A Gear Driven Basket - yields improved washing efficiency, ensuring higher contact pressure of the water-jets over water-driven models as t...

Torque Plates-The key to Bore Finishing

Torque Plates-The key to Bore Finishing

30th Jan 2018 in Company News

Torque Plates- The key to Bore Finishing Assembly of a honed engine where a Torque Plate is NOT fitted during machining is subject to dimensional variations of .003” to 0.004”. Torque Plates are designed to the same specifications as the head of that par...

Why Use a Crankshaft Linisher?

Why Use a Crankshaft Linisher?

5th Jul 2018 in Company News

  After the crankshaft has been ground, grinding marks and sharp edges can be evident on the surface of the journals. Using a crankshaft linisher (or bow linisher) to remove these marks and sharp edges prevents premature wear of the bearings.   The Auto & I...

Stainless Steel Rotary Parts Washer and Degreaser

Stainless Steel Rotary Parts Washer and Degreaser

Proudly Australian made. The Auto and Industrial Equipment range of Rotary Parts Washers are designed to clean grease and oil from aluminium, brass, cast iron and plastics. The Rotary Parts Washers are insulated and constructed from Stainless Steel with Stain...

Why use K-Line Guide Liners?

Why use K-Line Guide Liners?

Why use K-Line Guide Liners? K-Line Bronze Bullet Guide Liners have an interrupted spiral for oil retention. This helps the tighter guide to stem clearance for an improved performance and reduces valve stem sticking. K-Liners have been used for over 40 years ...

What is the Difference between a Suction and Pressure Bead Blaster?

What is the Difference between a Suction and Pressure Bead Blaster?

17th Oct 2017 in Company News

A Suction Blaster sucks up the glass beads into the gun and blows it out at speed to blast rusty or stained parts to give a semi polished finish. This can be used to clean alloy, steel or cast iron parts. A pressure blaster has a pressure pot in which the be...

Address: Unit 2/33 Macaulay Street Williamstown North VIC 3016